Menu Close
Lincoln Stainless Cut Length TIG Electrode

Diameters / Packaging

Diameters
 10 lb (4.5 kg) Plastic Tube
1/8 in (3.2 mm) TG55125638

Techalloy® 55

TIG (GTAW)

CLASSIFICATIONS:
Similar to AWS A5.14 : ENiFe-C I

TECHALLOY® 55 is designed to be similar to ENiFe-C I and is used for welding of cast irons to other cast irons as well as for joining cast irons to mild steels readily used for the repair of castings.

Diameter

Select Diameter

  • 1/8 in (3.2 mm)

Package

Select Package

  • 10 lb (4.5 kg) Plastic Tube
Buy Now

DETAILS

TECHALLOY® 55 is ideal for a preheat and inter-pass temperature of not less than 350°F (175°C) is required during welding on cast iron to minimize the potential for cracks.

Features

  • The welds are moderately hard and require carbide tipped tools for machining
  • A preheat and inter-pass temperature of not less than 350°F (175°C) is required during welding on cast iron to minimize the potential for cracks
  • Q2 Lot® - certificates showing actual wire composition available online

Typical Applications

  • Used for welding of cast irons to other cast irons as well as for joining cast irons to mild steels
  • Readily used for the repair of castings
  • Readily used for the repair of castings

Welding Positions

  • All

Shielding Gas

  • TIG 100% Ar

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

WIRE COMPOSITION

Classification %C %Cu %Mn %Ni %S %Si %Al %Fe
Typical Result 0.0 0.1 0.7 54.0 0.0 0.1 0.1 44.5