Diameters / Packaging
|
Diameters |
10 lb (4.5 kg) Plastic Tube |
|---|---|
| 1/8 in (3.2 mm) | TG208125638 |
| 1/16 in (1.6 mm) | TG208062638 |
| 3/32 in (2.4 mm) | TG208093638 |
DETAILS
TECHALLOY® 208 is ideal for dissimilar joints between nickel or nickel alloys to stainless or ferrite steels, high nickel alloy with Al and Ti for sound deposits Used for dissimilar joints between nickel or nickel alloys to stainless or ferritic steels.
Features
- High nickel alloy with Al and Ti for sound deposits
- Q2 Lot® - Certificate showing actual wire composition available online
- Q2 Lot® - Certificate showing actual wire composition available online
Typical Applications
- For MIG and TIG welding of nickel 200 and 202
- Can be used for overlay on steel as well as repairing cast iron castings
- Used for dissimilar joints between nickel or nickel alloys to stainless or ferritic steels
Welding Positions
- All
Shielding Gas
- TIG 100% Ar
Disclaimers
Service Information
Documentation
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNi-1 |
| CWB | AWS A5.14 | ERNi-1 |
WIRE COMPOSITION
| Classification | %Al | %C | %Cu | %Fe | %Mn | %P | %S | %Si | %Ti | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|
| ERNi-1 Requirement | 1.5 max. | 0.15 max. | 0.25 max. | 1.0 max. | 1.0 max. | 0.03 max. | 0.015 max. | 0.75 max. | 2.0 - 3.5 | 93.0 min. |
| Typical Result | 0.1 | 0.01 | 0.01 | 0.0 | 0.4 | 0.00 | 0.003 | 0.40 | 3.0 | 96.0 |