DETAILS
LINCORE® Super Rail™ Flux-Cored Wire reduce carbon steel repairs by 50% Consistent wire feeding with next generation lubrication typical application on Rail Ends/Points and Rail Crossing Points up to 4 layers deposit. Composition and properties depend upon dilution. Single layer deposit properties depend upon base metal and/or build-up material.
Features
- Reduce carbon steel repairs by 50%
- Consistent wire feeding with next generation lubrication
- Low material distortion on impact
- Work hardens faster without cracking
Typical Applications
- Rail Ends/Points
- Rail Crossing Points
Welding Positions
- Flat/Horizontal
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
DEPOSIT COMPOSITION
Classification | %Al | %C | %Cr | %Mn | %Mo | %Ni | %Si |
---|---|---|---|---|---|---|---|
Typical Result | 3.0 max. | 1.0 max. | 5.0 max. | 5.0 max. | 1.0 max. | 3.0 max. | 2.0 max. |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity |
ESO
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Deposition Rate
kg/hr (lb/hr) |
---|---|---|---|---|---|---|
5/64 in (2.0 mm) | DC+ | 37 (1 1/2) | 3.2 (125) | 24 | 218 | 7.0 (3.2) |
5/64 in (2.0 mm) | DC+ | 37 (1 1/2) | 5.1 (200) | 27 | 282 | 11.1 (5.0) |
5/64 in (2.0 mm) | DC+ | 37 (1 1/2) | 6.4 (250) | 30 | 327 | 13.9 (6.3) |
1/16 in (1.6 mm) | DC+ | 25 (1) | 5.1 (200) | 25 | 220 | 3.0 (6.7) |
1/16 in (1.6 mm) | DC+ | 25 (1) | 6.4 (250) | 27 | 250 | 4.0 (8.7) |
1/16 in (1.6 mm) | DC+ | 25 (1) | 8.3 (325) | 29 | 300 | 5.3 (11.6) |